- COATINGS -

LIQUID MEMBRANE (HOT)

Hot liquid polyurea membrane

Top quality waterproof membranes that are formed from the application at high temperature and pressure of their liquid components.

Featured Products

Urespray P-500

Is a pure polyurea elastomer system formed by the reaction of two fast-drying liquid components applied by mechanical spraying.

Urespray F-100

Is a hybrid polyurea elastomer system formed by the reaction of two fast-drying liquid components mixed by hot spraying equipment.

Urespray F-75

Is a hybrid polyurethane elastomer system formed by the reaction of two fast-drying liquid components mixed by hot spraying equipment.
ProductElongation (UNE-EN-ISO 527)TechnologyKey FeaturesDownloads
Urespray F-75> 180 %Hybrid Polyurea

  • Polyurethan membrane

  • Foam protection

  • Euroclass E according EN 13501:2019

  • 100% low emissions-solid.

  • Very fast curing

  • European Technical Assessment (ETA): Working life of the system (EOTA) W3 (25 years)

  • Contact with foodstuffs

  • No migration of substances to drinking water

Technical Data Sheet TDS
Urespray F-100> 350 %Hybrid Polyurea

  • Hybrid polyurea

  • Waterproof

  • Euroclass E according EN 13501:2019

  • Classification B Roof (t1) according EN 13501-5:2019

  • 100% solid low emissions

  • Very fast cure

Technical Data Sheet TDS
Urespray P-500> 350 %Pure Polyurea

  • Pure polyurea

  • Waterproof

  • Euroclass E according EN 13501:2019

  • Classification B Roof (t1) according EN 13501-5:2019

  • 100% solid low emissions

  • Very fast curing

  • European Technical Assessment (ETA): system shelf life (EOTA) W3 (25 years).

  • Food contact allowed

  • No migration of substances to drinking water

Technical Data Sheet TDS
Urespray P-700> 720 %Pure Polyurea

  • Pure polyurea

  • Waterproof

  • With an optimal elongation and 100% low emissions-solid

  • European Technical Assessment (ETA)

Technical Data Sheet TDS
Urespray S-004---Polyurethane

  • Foam protection

  • Decorative

  • High hardness

Technical Data Sheet TDS

Primers

ProductComponentsTechnologyKey FeaturesDownloads
Syntox AQ2Epoxy

  • Two-component primer, based on a low-viscosity aqueous liquid epoxy resin

  • Porous metal surfaces for use in the chemical atmosphere

  • Application: paintbrush, roller or airless spray gun


Technical Data Sheet TDS

Syntox FA2Epoxy

  • Two components epoxydic primer

  • Protection of metallic surfaces, porous and non-porous substrates

  • Application with paintbrush, roller or airless spray gun.


Technical Data Sheet TDS

Syntpur PO-842Polyurethane

  • Two-components polyurethane primer

  • Developed for sealing and priming porous substrates such as wood and concrete

  • Application with paintbrush, roller or airless spray gun.


Technical Data Sheet TDS

TopCoats

ProductComponentsTechnologyKey FeaturesDownloads
Acuthan1Acrylic

  • Thick waterproof coating made of special acrylic copolymers and butyl acrylates in aqueous emulsion, through which one obtains elastic membranes both waterproof and transpirable with a high outdoors resistance

  • Suitable for application on wood, mortar, concrete, aluminium, etc.

  • Continuous waterproofing of roofs, walls, etc.

  • Specially developed as an outer coating for rigid polyurethane spray foam and as protection against ultraviolet rays and atmospheric agents, reinforcing its waterproof effect.


Technical Data Sheet TDS

Alisyn AS2Polyurethane

  • 2K (Two-components) finishing, based on aliphatic polyurethane

  • Great light stability

  • Suitable for painting parking facilities, industrial and food service areas

  • For walkable areas


Technical Data Sheet TDS

Alisyn FA2Polyurethane

  • 2K (Two-components) finishing, based on aliphatic polyurethane

  • Metallic substrates as steel, aluminium, fibreglass reinforced polyester, wood, etc., where a superior resistant premium quality finishing is required

  • For non-walkable areas


Technical Data Sheet TDS

We help you find the product that best suits your project.

We have a technical team that will help you choose the most suitable product for the required application.