- APPLICATIONS -

CONSTRUCTION

Solutions for construction

We provide all kinds of solutions for the construction industry. Applications in the insulation sector stand out, both thermal and acoustic, as well as solutions for waterproofing, decoration, and other constructive elements. Our products, experience and knowledge of the sector speak on our behalf.

Select a product

PU Systems | Spray | Closed-Cell

Insulation – Europe

Product	Global Apparent Density (EN 1602)	Declared Compressive Strength (EN 826)	Recycled and Renewable Origin Content (% Polyol)	Thermal conductivity (Lambda declared)	Key Features
Poliuretan Spray 7129 Roof HFO	50-60 kg/m³	≥ 200 kPa	2	0,025-0,028 W/mK	Deck high density Very smooth surface Typical Compressive Strength >300 kPa
Poliuretan Spray S-303 HFO	35-45 kg/m³	ND	40	0,026-0,028 W/mK	Façades, interior ceilings and suspended floors VOC (A+) - BREEAM International AgBB/ABG Belgium VOC regulation Keymark Certificate AENOR Product Certificate NSAI Agrément BBA
Poliuretan Spray S-303 HFO (For UK market)	35-45 kg/m³	ND	40	0,026-0,028 W/mK	Façades, interior ceilings and suspended floors VOC (A+) - BREEAM International AgBB/ABG Belgium VOC regulation Keymark Certificate AENOR Product Certificate NSAI Agrément BBA UKCA Marked
Poliuretan Spray S-35HFO/ECOPlus	38-48 kg/m³	≥ 200 kPa	13	0,025-0,028 W/mK	Façades, interior ceilings, floors and roofs Byggvarubedömningen (BvB) approved
Poliuretan Spray S-35RGB/ECO	38-48 kg/m³	≥ 200 kPa	14	0,026-0,028 W/mK	Façades, interior ceilings, floors and roofs Keymark Certificate AENOR Product Certificate
Poliuretan Spray S-383 HFO	40-50 kg/m³	≥ 200 kPa	10	0,026-0,028 W/mK	Floors - up to 50mm per pass VOC (A+) BREEAM International AgBB/ABG Belgium VOC regulation Best classification for dimensional stalility according to UNE EN 1604:2013 Keymark Certificate AENOR Product Certificate Insula NL-aansluitdocument
Poliuretan Spray S-403 HFO	43-53 kg/m³	≥ 200 kPa	18	0,025-0,028 W/mK	Roof low density Typical Compressive Strength >300 kPa Keymark Certificate AENOR Product Certificate
Poliuretan Spray S-503 HFO	50-60 kg/m³	≥ 200 kPa	18	0,025-0,028 W/mK	Deck high density Typical Compressive Strength >300 kPa Keymark Certificate AENOR Product Certificate

If you need a previous version of the DoP, please request it at calidadeurope@synthesia.com

Insulation – LATAM

Product	Global Apparent Density (EN 1602)	Compressive Strength (EN 826)	Recycled and Renewable Origin Content (% Polyol)	Thermal conductivity	Key Features
Poliuretan Spray 7129 Roof	50-60 kg/m³	≥ 300 kPa	2	0,028 W/ mk	Roof high density
Poliuretan Spray S-303E-W	35-43 kg/m³	NA	27	0,028 W/ mk	Partition walls
Poliuretan Spray S-353E-W	38-48 kg/m³	≥ 200 kPa	28	0,028 W/ mk	Partition walls & floors
Poliuretan Spray S-403E-W	43-53 kg/m³	≥ 300 kPa	28	0,028 W/ mk	Roof low density
Poliuretan Spray S-503E-W	50-60 kg/m³	≥ 300 kPa	28	0,028 W/ mk	Roof high density

Structural

Product	Global Apparent Density EN 1602)	Compressive Strength (UNE-EN 826)	Blowing Agent	Key Features	Downloads
Poliuretan Spray S-3003E	300-400 kg/m³	NA	Water	Very smooth surface Protection of foams in farms
Poliuretan Spray S-4003	375-425 kg/m³	25-45 kg/cm2	Water	High compression values

PU Systems | Spray | Open-Cell

Thermic

Product	Global Apparent Density (EN 1602)	Water Absorption (Wp) (EN 1609)	Thermal conductivity (Lambda declared)	Key Features
Poliuretan Spray S-OC-008	6-10 kg/m³	≤ 3 kg/m²	0,039 W/mK	"In situ" sprayed Partition walls, pitched roofs and suspended floors
Poliuretan Spray S-OC-008 (For UK market)	6-10 kg/m³	≤ 3 kg/m²	0,039 W/mK	"In situ" sprayed Partition walls, pitched roofs and suspended floors UKCA Marked
Poliuretan Spray S-OC-008E	7-10 kg/m³	≤ 3 kg/m²	0,039 W/mK	"In situ" sprayed Partition walls, pitched roofs and suspended floors Euroclass E according EN 13501-1:2019
Poliuretan Spray S-OC-008E (For UK market)	7-10 kg/m³	≤ 3 kg/m²	0,039 W/mK	"In situ" sprayed Partition walls, pitched roofs and suspended floors Euroclass E according EN 13501-1:2019 UKCA Marked

If you need a previous version of the DoP, please request it at calidadeurope@synthesia.com

Acoustic

Product	Global Apparent Density (EN 1602)	Water Absorption (Wp) (EN 1609)	Thermal conductivity (Lambda declared)	Key Features
Phono Spray I-905 (Injection)	10-14 kg/m³	≤ 2 kg/m²	0,039 W/mK	“In situ” injected Partition walls
Phono Spray S-904	9-11 kg/m³	≤ 3 kg/m²	0,039 W/mK	“In situ” sprayed Partition walls
Phono Spray S-907 INC	45-65 kg/m³	≤ 3 kg/m²	0,039 W/mK	“In situ” injected Floors

If you need a previous version of the DoP, please request it at calidadeurope@synthesia.com

PU Systems | Insulation Panels | PUR

Continouos Panel PUR

Product	Blowing Agent	Ratio Pol./Iso	Components	Key Features
Pouring System POLIOL 7186-CP	Pentane	100/145	4	Halogenated technology 10% Recycled and Renewable Origin Content (% Polyol)
SynthePUR C-7186-M	Pentane	100/145	4	Free-halogenated technology
SynthePUR C-7366-Z	HFO	100/140	3	Halogenated technology

Discontinouos Panel PUR

Product	Blowing Agent	Free Rise Density (Kg/m³)	Ratio Pol./Iso	Components	Key Features	Downloads
SynthePUR D-7788-L-Z-36	HFO	35-37	100/115	2	Indicated for insulation and filling of all type of cavities as tanks, deposits, cool stores, panels, etc. Slow reaction times Medium density 25% Recycled and renewable origin content ( % Polyol)
Poliol 9932 R-X	HFC	27-31	100/110	2	Halogenated technology Low thickness panels Reaction to fire R1 by ABNT NBR 7358:2015

PU Systems | Insulation Panels | PIR

Continouos Panel PIR

Product	Recycled and Renewable Origin Content (% Polyol)	Blowing Agent	Ratio Pol./Iso	Components	Key Features
Poliol 7194	34%	Pentane	100/200	5	Halogenated technology Best dimensional stalility by UNE EN 13165:2013 +A2:2017 FM Approvals certificate only available on polyol manufactured in Europe Available in LATAM
SynthePIR C-7634-PIR-XP	29%	Pentane	100/260	4	Density 30-42 panels Free-halogenated technology Also available in LATAM
SynthePIR C-7718 PIR	29%	Pentane	100/260	5	Free-halogenated technology Best dimensional stalility by UNE EN 13165:2013 +A2:2017
SynthePIR C-7730 PIR LV	26%	Pentane	100/200	5	Free-halogenated technology Best dimensional stalility by UNE EN 13165:2013 +A2:2017

PU Systems | Insulation Panels | Adhesives

Product	Ratio Pol./Iso	Application Technique	Working Time (sec)	Key Features
Adhesivo 3057 v2	100/112	Rotating disc/Spray	15-19	2 components Mineral wool panels Unfilled
Adhesivo 7681	100/123	Rotating disc/Spray	105-125	2 components PIR Panels Unfilled
Adhesivo SK 11 R-V	100/23	Wiper & Dispensing technique	30/60 (min)	2 components Filled Mineral wool panels
Synthel PE-3015	1 component	Dispensing technique	----	1 component PIR Panels 2010 FTP Code Annex 1 Part 5 FM Approvals Class: 4880 Unfilled
Synthel 3215	1 component	Dispensing technique	----	1 component PIR Panels Unfilled

PU Systems | Coatings - Polyurea | Hot liquid membranes

Membranes

Product	Elongation (UNE-EN-ISO 527)	Technology	Key Features
Urespray F-75	> 180 %	Hybrid Polyurea	Polyurethan membrane Foam protection Euroclass E according EN 13501:2019 100% low emissions-solid. Very fast curing European Technical Assessment (ETA): Working life of the system (EOTA) W3 (25 years) Contact with foodstuffs No migration of substances to drinking water
Urespray F-100	> 350 %	Hybrid Polyurea	Hybrid polyurea Waterproof Euroclass E according EN 13501:2019 Classification B Roof (t1) according EN 13501-5:2019 100% solid low emissions Very fast cure
Urespray P-500	> 350 %	Pure Polyurea	Pure polyurea Waterproof Euroclass E according EN 13501:2019 100% solid low emissions Very fast curing European Technical Assessment (ETA): system shelf life (EOTA) W3 (25 years). No migration of substances to drinking water
Urespray P-700	> 720 %	Pure Polyurea	Pure polyurea Waterproof 100% solid Low emissions European Technical Assessment (ETA)

Primers

Product	Components	Technology	Key Features
Syntox AQ	2	Epoxy	Two-component primer, based on a low-viscosity aqueous liquid epoxy resin Porous metal surfaces for use in the chemical atmosphere Paintbrush, roller or airless spray gun
Syntox-FA	2	Epoxy	Two components epoxydic primer Protection of metallic surfaces, porous and non-porous substrates Paintbrush, roller, or airless spray gun
SyntPUR PO-84	2	Polyurethane	Two-components polyurethane primer Developed for sealing and priming porous substrates such as wood and concrete Paintbrush, roller, or airless spray gun

Top Coat

Product	Components	Technology	Key Features	Downloads
Acuthan AQ	1	Acrylic	Thick waterproof coating made of special acrylic copolymers and butyl acrylates in aqueous emulsion, through which one obtains elastic membranes both waterproof and transpirable with a high outdoors resistance Suitable for application on wood, mortar, concrete, aluminium, etc. Continuous waterproofing of roofs, walls, etc. It has been developed specially as outer covering for spray rigid polyurethane foam to protect it of ultraviolet rays and atmospheric agents, to reinforce his waterproof effect
Alisyn-FA	2	Polyurethane	2K (Two-components) finishing, based on aliphatic polyurethane Metallic substrates as steel, aluminium, fibreglass reinforced polyester, wood, etc., where a superior resistant premium quality finishing is required For non-walkable areas

PU Systems | Industrial System | Rigid

Pouring System

Product	Free Density (Kg/m³)	Ratio Pol./Iso	Working Time (sec)	Key Features
SynthePUR D-7788-L-Z-36	35-37	100/115	30-36	Indicated for insulation and filling of all type of cavities as tanks, deposits, cool stores, panels, etc. Slow reaction times Medium density 25% Recycled and renewable origin content ( % Polyol)
SynthePUR D-9762-Z-36	35-37	100/110	12-16	Indicated for insulation and filling of all type of cavities as tanks, deposits, cool stores, panels, etc.
SynthePUR D-9154-Z-42	40-44	100/110	24-32	Indicated for insulation and filling of all type of cavities as tanks, deposits, cool stores, panels, etc. Slow reaction times Medium-high density 11% recyclable and renewable content
SynthePUR D-560-Z-46	44-48	100/115	17-21	Indicated for insulation and filling of all type of cavities as tanks, deposits, cool stores, panels, etc. Slow reaction times High density
SynthePUR D-7024-Z-31	30-32	100/135	18-24	Indicated for insulation and filling of all type of cavities as tanks, deposits, cool stores, panels, etc. Low density
SynthePUR D-7405-M-26	25-27	100/147	10-16	Cavity filling 3 Components Foaming agent: Pentane
Poliol 7154-FG	22-24	100/117	8-12	Cavity filling 3 Components Foaming agent: Pentane
Poliol 7136	29-32	100/115	8-12	"In situ" injected with spray machine Highly indicated for restoration of buildings, insulation, and filling of all type of cavities CE Marked
Poliol 7136 (For UK market)	29-32	100/115	8-12	"In situ" injected with spray machine Highly indicated for restoration of buildings, insulation, and filling of all type of cavities UKCA Marked
SynthePUR D-7619-C-26	24.5-27.5	100/140	18-24	Cavity filling 3 Components Foaming agent: Pentane 10% Recycled and Renewable Origin Content (% Polyol)

If you need a previous version of the DoP, please request it at calidadeurope@synthesia.com

Wood Imitation SYNTHEMAD

Product	Free Density (Kg/m³)	Ratio Pol./Iso	Working Time (sec)	Key Features
SyntheMAD 9111-M-110	100-120	100/100	16-20	Decorative Panels, furniture industry, beams, technical parts, mouldings, adornments, frames Fast demoulding time Medium density
SyntheMAD 9369-L-M-150	150-160	100/100	30-40	Decorative Panels, farms windows, furniture industry, beams, technical parts, mouldings, adornments, frames Long shelf life Medium density
SyntheMAD 9372-M-70	66-74	100/120	20-24	Furniture industry, beams, technical parts, mouldings, adornments, frames Fast demoulding time Low density
SyntheMAD 9411-L-A-230	220-250	100/100	28-32	Decorative Panels, furniture industry, beams, technical parts, mouldings, adornments, frames Long shelf life High density
SyntheMAD 9457-A-600	500-650	100/100	30-36	Decorative Panels, furniture industry, beams, technical parts, mouldings, adornments, frames Long shelf life Very high density

PU Systems | Industrial System | Hot Elastomer SYNTHECAST

Product	Prepolymer Nature	Viscosity (80 ºC) cPs	SHORE Hardness DIN 53505 (ShA)	Key Features	Downloads
Synthecast PS-1190	TDI-Polyester	1.500-3.500	90 ± 3	Systems based on ESTER-TDI hardness scale for use up to 90 – 95 Shore A Due to their properties leads to a many enginering applications Can be used in a multitude of chemical environments but not recommended for use in high humidity or exposure to water
Synthecast PS-1195	TDI-Polyester	1.000-2.500	95 ± 3	Systems based on ESTER-TDI hardness scale for use up to 90 – 95 Shore A Due to their properties leads to a many enginering applications Can be used in a multitude of chemical environments but not recommended for use in high humidity or exposure to water

PU Systems | Industrial System | Cold Elastomer

Characteristics	Ratio Pol./Iso	Working time (min)	Hardness (Shore A)	Key Features
SyntheCOLD PT-9860-95L Inc	100/80	03-may	95	Elastic moulds for moulding
SyntheCOLD PT-9860-75	100/43	03-abr	75	Elastic moulds for moulding
Poliol 7033	100/25	04-jun	50	Elastic moulds for moulding

PU Systems | Industrial System | Adhesives and binders

Product	Components	Type	Ratio Pol./Iso	Brookfield viscosity 22 ºC (cPs)	Working Time (sec)	Key Features
Adhesivo SK 11 R-V	2	PU Filled MDI Based	100/23	8.000	30/60 (min)	Filled Medium viscosity Long shelf life
Adhesivo 7511	2	PU Filled MDI Based	100/35	1.800-2.800	10 (min)	Filled Low viscosity Fast curing
Synthan PE-3008	1	MDI prepolymer	-	1.500-2.500	-	One-component adhesive Humidity curing Binder recycled rubber granules Low viscosity Unfilled
Synthan A-92	1	MDI prepolymer	-	3.000-5.000	-	One-component adhesive Humidity curing Binder recycled rubber granules Medium viscosity Unfilled

Polyester polyols | Rigid Foam

Product	Reference HOOPOL	OHV (mg KOH/g)	Viscosity (mPa s 25 ºC)	Aromatic material (%)	Recycled material (%)	Renewable material (%)	TCPP
PA	F-4392-T	180 - 200	3.000 - 8.000	15 - 30	---	5 - 10	yes
PA	F-4394-D	230 - 250	~ 4.000	15 - 30	---	---	yes
PA	F-4390	230 - 260	8.000 - 12.000	15 - 30	---	---	no
PA	F-4361	300 - 320	2.500 - 3.400	15 - 30	---	---	no
PET	F-1397-A	180 - 200	2.500 - 5.000	10 - 25	30 - 50	5 - 20	no
PET	F-1394-A	230 - 250	1.000 - 2.500	10 - 25	30 - 50	5 - 20	no
PET	F-1361	300 - 320	500 - 1.500	10 - 25	30 - 50	5 - 20	no
PET	F-1360-A	325 - 375	500 - 2.000	10 - 25	30 - 50	---	no
High Functionality	FR-3360	330 - 350	2.000 - 6.000	10 - 25	20 - 35	30 - 40	no
High Functionality	FR-860	390 - 430	~ 1.500 (60º)	---	---	---	no
High Functionality	FR-360	390 - 430	5.000 - 7.500	---	---	---	no
OCF	F-1395-P	160 - 180	1.500 - 2.100	20 - 30	---	10 - 20	no
OCF	F-5890	170 - 190	2.000 - 5.000	5 - 20	---	---	no
OCF	F-3392	250 - 270	2.500 - 4.500	5 - 20	---	---	no

We help you find the product that best suits your project.

We have a technical team that will help you choose the most suitable product for the required application.

CONSTRUCTION

Solutions for construction

Select a product

PU Systems | Spray | Closed-Cell

Insulation – Europe

Insulation – LATAM

Structural

PU Systems | Spray | Open-Cell

Thermic

Acoustic

PU Systems | Insulation Panels | PUR

Continouos Panel PUR

Discontinouos Panel PUR

PU Systems | Insulation Panels | PIR

Continouos Panel PIR

PU Systems | Insulation Panels | Adhesives

PU Systems | Coatings - Polyurea | Hot liquid membranes

Membranes

Primers

Top Coat

PU Systems | Industrial System | Rigid

Pouring System

Wood Imitation SYNTHEMAD

PU Systems | Industrial System | Hot Elastomer SYNTHECAST

PU Systems | Industrial System | Cold Elastomer

PU Systems | Industrial System | Adhesives and binders

Polyester polyols | Rigid Foam

We help you find the product that best suits your project.

Select

* This DoP is only for the UK market.

Seleccionar idioma / Select Language

Seleccionar idioma / Select Language

Seleccionar idioma / Select Language

Seleccionar idioma / Select Language

Seleccionar idioma / Select Language

Seleccionar idioma / Select Language