- APPLICATIONS -

COATINGS

Solutions for Coatings

A range of solutions created for coating applications, offering solutions where certain improved properties offer excellent performance in insulation, finishes, impermeability, resistance and many other advantages.

Select a product

PU Systems | Closed-cell Spray Foam

Product	Global Apparent Density EN 1602)	Compressive Strength (UNE-EN 826)	Blowing Agent	Key Features	Downloads
S-4003	375-425 kg/m³	25-45 kg/cm2	Water	High compression values
9452	350-450 kg/m³	35-55 kg/cm2	Water	High compression values

Polyester Polyols | CASE

Product	Reference HOOPOL	Mol.Weight (g/mol)	Viscosity (mPa s 60 ºC)
Linear Aliphatic	F-123	1.000	300 - 350
Linear Aliphatic	S-101-55	2.000	1.050 - 1.350
Linear Aliphatic	F-330	2.750	1.600 - 2.400
Linear Aliphatic	F-501	2.000	1.300 - 1.500
Linear Aliphatic	F-531	4.000	6.000 - 10.000
Linear Aliphatic	F-600	2.000	2.000 - 4.000
Linear Aliphatic	F-690	500	2.300 - 3.300 (25ºC)
Linear Aliphatic	F-900	2.000	700 - 1.300
Linear Aliphatic	F-932	3.750	4.000 - 7.000
Linear Aliphatic	F-10201	2.000	1.500 - 2.000
Linear Aliphatic	F-10670	2.650	2.300 - 2.700
Linear Aliphatic	S-1015-35	3.000	3.000 - 3.900
Linear Aliphatic	S-1015-120	950	300 - 400
Linear Aliphatic	S-1015-210	530	140 - 150
Linear Aliphatic	S-1042-55	2.000	800 - 1.300
Linear Aliphatic	S-1063-120	950	250 - 350
Linear Aliphatic	S-1155-55	2.000	1.300 - 1.500
Linear Aliphatic/Aromatics	F-4910	2.000	9.000 - 15.000
Linear Aliphatic/Aromatics	F-5321	1.000	3.500 - 5.500 (25ºC)
Linear Aliphatic/Aromatics	F-9900	2.000	2.300 - 2.900
Linear Aliphatic/Aromatics	F-9920	950	400 - 600

Polyester Polyols | Green Polyester Polyol

Reference BIO-HOOPOL	BIO content* %	Mol.Weight (g/mol)	Melting Point (ºC)	Glass Trans. Tª (ºC)	Viscosity (mPa s)
9110	>90	2.000	33	-	2.500 (40ºC)
9710	60-70	2.800	-	-59	25.000 (25ºC)
11003	100	2.000	45	-	2.700 - 3.700 (60ºC)
11023	100	1.000	38	-	700 (60ºC)
11034	60-70	3.750	-	-17	1.000 - 5.000 (120ºC)
11043	100	1.400	50	-	1.400 (60ºC)
11053	100	660	42	-	380 (60ºC)
11501	100	2.000	112	-	250 (130ºC)
11503	100	2.000	57	-	650 - 1.550 (80ºC)
11520	100	1.000	104	-	~50 (130ºC)
11531	40-50	4.000	113	-	400 - 1.600 (130ºC)
11532	100	4.000	113	-	400 - 1.600 (130ºC)
11533	100	3.900	96	-	600 (130ºC)
11580	100	2.900	107	-	400 (130ºC)
11900	>30	2.000	48	-	1.500 (60ºC)
11903	70-80	2.000	-	-47	2.100 (60ºC)
11904	100	2.000	23	-	1.500 (60ºC)
11929	>30	950	46	-	320 (60ºC)
13003	100	2.000	-	-51	1.900 (60ºC)
13033	100	3.750	-	-47	5.000 (80ºC)

Polyester Polyols | Reactive Hot Melts

Product	Reference HOOPOL	Mol. Weight (g/mol)	Melting Point (ºC)	Glass Trans. Tª (ºC)	Viscosity (mPa s)
Crystalline	F-900	2.000	53	---	700 - 1.300 (60 ºC)
Crystalline	F-970	3.000	54	---	1.500 - 3.500 (60 °C)
Crystalline	F-972	2.700	54	---	1.500 - 2.800 (60 ºC)
Crystalline	F-932	3.750	57	---	4.000 - 7.000 (60 ºC)
Crystalline	F-902	5.500	58	---	2.000 - 8.000 (80 °C)
Crystalline	F-903	6.500	59	---	2.000 - 6.000 (120ºC)
Crystalline	F-911	8.500	59	---	3.000 - 12.000 (130ºC)
Amorphous	F-5610	2.000	---	14	1.100 (130 °C)
Amorphous	F-5630	3.500	---	16	2.000 - 6.000 (130 ºC)
Liquid	F-4910	2.000	---	-25	9.000 - 15.000 (60 °C)

Specialties | Accuacril

Product	Type	Solid Content %	Brookfield viscosity 25ºC CPs	Applications & Key features	Downloads
Accuacril 2011	Water-based self-crosslinking modified acrylic copolymer dispersion	43-45	100-700	Wood varnishes and stain, paints and varnishes for exterior wood doors and windows. Industrial applications for wood doors and windows (robot, airless, flow coating). Water paints for plastic supports.
Accuacril 2123	Aqueous hydroxy acrylic resin to combine with water polyisocyanates	40,5-43,5	300-3.300	To formulate 2-pack topcoats. OH content: 4 %. Neutralization agent: DMEA (Dimethylethanolamine). Recommended in refinishing, industrial and plastic coats formulations. Due to its good mechanical and thermodynamic stability it is possible to make pigmented coats.

Specialties | Accuafer Accuapol Accuapox

Product	Type	Solid Content %	Brookfield viscosity 25 ºC CPs	Applications & Key features
Accuafer 2042	Water-based modified acrylic copolymer emulsion	42±1	100-400	Varnishes for plastic. Paints for metal. Anticorrosive primers.
Accuapol 6551 BG-70	Water dispersible modified alkyd resin for stoving enamel systems in topcoat applications	70±2	20-600 (50% Butylglycol)	ACCUAPOL 6551 BG 70 must be neutralized with amines until reaching a pH 8-8,5, prior to the dilution with water. Stoving enamel systems based with a stoving temperature of 130-160ºC could be achieved in combination with water reducible melamines. Films made out with the ACCUAPOL 6551 BG 70 show a good balance of mechanical physical and chemical resistance properties.
Accuapol 9050 BG-70	Water dispersible modified polyester resin for stoving enamel systems in topcoat applications	70±1	6.000-14.000	ACCUAPOL 9050 BG 70 is a polyester to formulate colour paste in order to complete with suitable water resins and combined with water soluble melamine resins (preferably hexa methoxymethyl melamine grade) to stove cured systems. To this combination suitable stoving range is 20-30 minutes at 140-160 ºC, it depends on the melamine. These waterborne enamels have good mechanical properties, flexibility and good yellowing resistance.
Accuapol 9051 BDG-50	Water dispersible modified polyester resin for stoving enamel systems in topcoat applications	50±2	750-2.250	ACCUAPOL 9051 BDG 50 is a polyester to formulate colour paste in order to complete with suitable water resins and combined with water soluble melamine resins (preferably hexamethoxy methyl melamine grade) to stove cured systems. To this combination suitable stoving range is 20-30 minutes at 140-160 ºC, it depends on the melamine. These waterborne enamels have good mechanical properties, flexibility, and good yellowing resistance.
Accuapol VP 8065	Saturated polyester resin, water soluble	65±1	10.000-25.000	ACCUAPOL VP 8065 is water-based polyester to combine with water soluble melamine resins (preferably hexamethoxy methyl melamine grade) to stove cured systems. The suitable stoving range is 10-30 minutes at 140-180ºC, it depends on the melamine. Waterborne enamels have good mechanical properties and flexibility.
Accuapox 6550	Water dispersible ester-epoxy acrylic resin for primers applications	70±2	8.000-14.000	Anticorrosive primers. In combination with ACCUAFER 2042 for air and forced drying, over metal, plastic, and wood surfaces. Stoving drying coatings in combination with melamine resins.

Specialties | Synthacril

Product	Type	Solvent and Co-solvent	Solid Content %	Brookfield viscosity 25ºC CPs	Hydroxyl value (on solid resin) mg KOH/g	Applications & Key features
Synthacril 6814 XAB65	S/B Hydroxylated acrylic	Xylene/Butyl acetate	65	6.000-10.000	2,5 appox.	Primer and top coat (DTM) Primer and top coats for spray applications Primer on metal and plastic surfaces
Synthacril 6818 BAX 60	S/B Thermoplastic acrylic resin in solution	Butyl Acetate/Acetone/Xylene	60±2	1.200-2.500		Good adhesion on metal surfaces High flexibility which allows to formulate paint for plastics Partially compatible with some alkyd resins
Synthacril 6818 TAX 60	S/B Thermoplastic acrylic resin in solution	Toluene/Xylene/Acetone	60±1	3.500-5.500		Good adhesion on metal surfaces High flexibility which allows to formulate paint for plastics Limited compatibility with some alkyd resins
Synthacril 6827 X 60	S/B Hydroxylated acrylic	Xylene	60±1	3.500-6.000	2 appox.	Paints for difficult metal surfaces Paints for plastics applications Varnishes for wood applications
Synthacril 6827 XAB 60	S/B Hydroxylated acrylic	Xylene/Butyl acetate	60±2	3.500-6.000	2 appox.	Fast drying two pack systems Primer and top coat (DTM) for general industrial applications
Synthacril 6830 T 60	S/B Thermoplastic acrylic resin in solution	Toluene	60±2	6.000-12.000		SYNTHACRIL 6830 T 60 is an acrylic copolymer in solution intended for the production of traffic paints Its quick solvent release makes drying time shorter, allowing driving in a short time The high abrasion resistance of SYNTHACRIL 6830 T 60 guaranties the durability of traffic signals
Synthacril 6836 X 60	S/B Hydroxylated acrylic	Xylene	60±2	1.700-2.800	2,6 appox.	Fast drying two pack systems Primer and top coat (DTM) Perfect price/quality balance
Synthacril 6838 XM 60	S/B Hydroxylated acrylic	Xylene/Methoxy propyl acetate	60±2	1.500-3.000	4,5 appox.	At ambient temperature drying or forced drying two-pack systems with high gloss, excellent mechanical properties, superior outdoor durability and chemical resistance, in particular for automotive refinishing topcoats or clearcoats It is also suitable OEM applications
Synthacril 6859 X60	S/B Hydroxylated acrylic	Xylene	60	1.200-2.200	1,5 appox.	Fast drying two pack systems. In combination with polyisocyanates for air drying as well as forced drying primers Primer and top coat (DTM) High gloss, good hardness speed, good mechanical properties and good adhesion to metals and plastic substrates
Synthacril 6860 AB70	S/B Hydroxylated acrylic	Butyl acetate	70±2	6.000-12.000	4,5 appox.	Air-drying and forced drying two-pack medium high solids systems with high gloss, excellent mechanical properties, excellent chemical resistance and good outdoor stability for automotive refinishes

Specialties | Synthane

Product	Type	Solvent	Solid Content %	% NCO	Free monomer content	Applications & Key features
Synthane P-80	S/B Aromatic Polyisocyanate	Ethyl acetate	73-77	12,9-13,7	< 0,5	It is used in combination with modified polyesters or hydroxylated acrylics to produce two-component coats. 2 K paints and furniture varnishes. High flexibility, chemical and abrasion resistance
Synthane PV-75	S/B Aliphatic Polyisocyanate	Xylene / Methoxy propyl acetate (1:1)	73-77	15,7-17,3	< 0,5	It is used in combination with modified polyesters or hydroxylated acrylics to produce two-component coats 2 K paints and furniture varnishes. High flexibility and stability against UV.
Synthane PV-90	S/B Aliphatic Polyisocyanate	Butyl acetate / Nafta 100	89-91	18,7-20,3	< 0,2	It is used in combination with modified polyesters or hydroxylated acrylics to produce two-component coats 2 K paints and furniture varnishes. High flexibility and stability against UV.
Synthane PV-100 LV	Solvent free aliphatic Polyisocyanate	-	100	22,0-24,0	< 0,5	It is used in combination with modified polyesters or hydroxylated acrylics to produce two-component coats 2 K systems with high solids and low VOC contents. Polyurethane dispersion crosslinker

Specialties | Synthanol

Product	Type	Brookfield viscosity 25 ºC CPs	OH-content	Applications & Key features	Downloads
Synthanol 4406	Polyether polyol	740-930	32-37	Prepolymers for coatings, adhesives and sealants

We help you find the product that best suits your project.

We have a technical team that will help you choose the most suitable product for the required application.