SYCLENE

Synthesia presents its Syclene product range, a line that reflects the company’s commitment to developing solutions based on renewable sources. We are pioneers in this sector, using recycled PET as a key raw material in the production of polyester polyols. We are Planet Passionate.

Polyester Polyols | Green Polyester Polyols (BIO)

Reference BIO-HOOPOL	BIO content* %	Mol.Weight (g/mol)	Melting Point (ºC)	Glass Trans. Tª (ºC)	Viscosity (mPa s)
9110	>90	2.000	33	-	2.500 (40ºC)
9710	60-70	2.800	-	-59	25.000 (25ºC)
11003	100	2.000	45	-	2.700 - 3.700 (60ºC)
11023	100	1.000	40	-	500-800 (60ºC)
11034	60-70	3.750	-	-17	1.000 - 5.000 (120ºC)
11043	100	1.400	42	-	1.400 (60ºC)
11053	100	660	38	-	380 (60ºC)
11501	47	2.000	107	-	250 (130ºC)
11503	100	2.000	57	-	650 - 1.550 (80ºC)
11520	100	1.000	104	-	~50 (130ºC)
11531	40-50	4.000	113	-	400 - 1.600 (130ºC)
11532	100	4.000	113	-	400 - 1.600 (130ºC)
11533	100	3.900	96	-	600 (130ºC)
11580	100	2.900	110	-	400 (130ºC)
11900	37	2.000	48	-	1.500 (60ºC)
11903	73	2.000	-	-47	2.100 (60ºC)
9004	100	2.000	23	-	1.500 (60ºC)
11929	34	950	46	-	320 (60ºC)
12003	100	2.000	52	-	1.100 (60ºC)
12530	100	3.750	62	-	3.000 (80ºC)
12600	33	2.000	-	-21	6.500 (80ºC)
12900	59	2.000	64	-	500 (80ºC)
12930	64	3.750	67	-	1.000 - 4.000 (80ºC)
12970	59	2.500	65	-	1.000 (80ºC)
13003	100	2.000	-	-51	1.900 (60ºC)
13033	100	3.750	-	-47	1.500-5.500 (80ºC)

PU Systems | Spray | Closed-Cell

Insulation – Europe

Product	Global Apparent Density (EN 1602)	Declared Compressive Strength (EN 826)	Thermal conductivity (Lambda declared)	Key Features
Poliuretan Spray S-303 HFO	35-45 kg/m³	ND	0,026-0,028 W/mK	Façades, interior ceilings and suspended floors VOC (A+) - BREEAM International AgBB/ABG Belgium VOC regulation Keymark Certificate AENOR Product Certificate NSAI Agrément
Poliuretan Spray S-303 HFO (For UK market)	35-45 kg/m³	ND	0,026-0,028 W/mK	Façades, interior ceilings and suspended floors VOC (A+) - BREEAM International AgBB/ABG Belgium VOC regulation Keymark Certificate AENOR Product Certificate NSAI Agrément UKCA Marked
Poliuretan Spray S35-Z	38-48 kg/m³	≥ 200 kPa	0,026-0,028 W/mK	Façades, interior ceilings, floors and roofs Keymark Certificate AENOR Product Certificate BvB Certificate Radon barrier Certificate
Poliuretan Spray S-383 HFO	41,6-50 kg/m³	≥ 200 kPa	0,026-0,028 W/mK	Floors - up to 50mm per pass VOC (A+) BREEAM International AgBB/ABG Belgium VOC regulation Best classification for dimensional stalility according to UNE EN 1604:2013 Keymark Certificate AENOR Product Certificate Insula NL-aansluitdocument
Poliuretan Spray S40-Z	43-53 kg/m³	≥ 200 kPa	0,026-0,028 W/mK	Roof low density Keymark Certificate AENOR Product Certificate
Poliuretan Spray S50-Z	50-60 kg/m³	≥ 200 kPa	0,026-0,028 W/mK	Roof high density Typical Compressive Strength >300 kPa Keymark Certificate AENOR Product Certificate

Structural

Product	Global Apparent Density EN 1602)	Compressive Strength (UNE-EN 826)	Blowing Agent	Key Features	Downloads
Poliuretan Spray S-3003E	300-400 kg/m³	NA	Water	Very smooth surface Protection of foams in farms
Poliuretan Spray S-4003	375-425 kg/m³	25-45 kg/cm2	Water	High compression values

Polyester polyols | Rigid Foam

Product	Reference HOOPOL	OHV (mg KOH/g)	Viscosity (mPa s 25 ºC)	Aromatic material (%)	Recycled material (%)	Renewable material (%)
PET	F-1391	240 - 260	3.900 - 5.200	10 - 25	30 - 50	---
PET	F-1397	180 - 200	2.500 - 5.000	10 - 25	30 - 50	5 - 20
PET	F-1397-A	180 - 200	2.500 - 5.000	10 - 25	30 - 50	5 - 20
PET	F-1394-A	230 - 250	1.000 - 2.500	10 - 25	30 - 50	5 - 20
PET	F-1361	300 - 320	500 - 1.500	10 - 25	30 - 50	5 - 20
PET	F-1360-A	325 - 375	500 - 2.000	10 - 25	30 - 50	---

PU Systems | Insulation Panels | PUR

Continouos Panel PUR

Product	Blowing Agent	Ratio Pol./Iso	Components	Key Features	Downloads
Pouring System POLIOL 7186-CP	Pentane	100/145	4	Halogenated technology 10% Recycled and Renewable Origin Content (% Polyol)

Discontinouos Panel PUR

Product	Blowing Agent	Free Rise Density (Kg/m³)	Ratio Pol./Iso	Components	Key Features	Downloads
SynthePUR D-7788-L-Z-36	HFO	35-37	100/115	2	Indicated for insulation and filling of all type of cavities as tanks, deposits, cool stores, panels, etc. Slow reaction times Medium density Recycled content (PET)

PU Systems | Insulation Panels | PIR

Continouos Panel PIR

Product	Blowing Agent	Ratio Pol./Iso	Components	Key Features
Poliol 7194	Pentane	100/200	5	Halogenated technology Best dimensional stalility by UNE EN 13165:2013 +A2:2017 Components identified as products in FM approvals Based on recycled PET polyols
SynthePIR C-7634-PIR-XP	Pentane	100/260	4	Density 30-42 panels Free-halogenated technology Based on recycled PET polyols
SynthePIR C-7730 PIR LV	Pentane	100/200	5	Free-halogenated technology Best dimensional stalility by UNE EN 13165:2013 +A2:2017

PU Systems | Industrial System | Rigid

Pouring System

Product	Free Density (Kg/m³)	Ratio Pol./Iso	Working Time (sec)	Key Features	Downloads
SynthePUR D-7788-L-Z-36	35-37	100/115	30-36	Indicated for insulation and filling of all type of cavities as tanks, deposits, cool stores, panels, etc. Slow reaction times Medium density Recycled content (PET)

We help you find the product that best suits your project.

We have a technical team that will help you choose the most suitable product for the required application.